How to Root Your Samsung Galaxy S3 (And Flash Stock ROMs) Using Odin for Windows

Need root on your Samsung Galaxy S3? Phone not getting the Jelly Bean update? Stuck on the Samsung screen? Phone bricked? Need to restore back to stock? Odin can help!

What is Odin?

Odin is a Windows-only program, designed by Samsung themselves, used to root, flash, upgrade, and restore Samsung phones using special firmware files specific to your model.

Update: We've recently found what has got to be the easiest root method ever. No cords, no computers—just download one app directly to your S3, regardless of carrier, and you'll be rooted in less than a minute. Check out the guide here.

What You Will Need

• The latest Samsung USB drivers. These are universal.
• The latest version of Odin (3.07).

To Flash Firmware

• The latest firmware file for your model phone. Via the link, select your device from the pull-down menu on the left to download the file. If you don't know your model number, you can find it via Settings -> About Phone on your device.

To Obtain Root

• The appropriate device-compatible CF-Auto-Root file.
• The app ROM Manager (free version).

Step 1: Install Samsung USB Drivers

Start by downloading and installing the USB drivers onto your Windows computer. You'll need them to properly connect your Galaxy S3 to your computer with Odin. You may be prompted to reboot your computer after they're installed.

Step 2: Extract Odin

Using the provided link, download and unzip Odin onto your desktop. The software does not need to be installed, just extracted.

Step 3: Set Phone to Download Mode

Turn off your GS3 if it's on. If your phone is stuck or frozen, take off the back cover and remove the battery then put it back in.

Press and hold down the Home Key, Volume Down Key, and Power Button at the same time until the Samsung screen shows.

Your phone will boot into download mode now.

Step 4: Using Odin

Connect your GS3 to your computer with the included USB cable that came with your phone. Go into the Odin folder and open the Odin app.

Under "Option", make sure "Auto Reboot" and "F. Reset Time" are checked. Under "ID:COMM", "connected" should be showing. This just means Odin sees your phone is connected and is ready to begin flashing.

Step 5: Load and Flash File

To Flash Samsung GS3 Firmware

Extract the firmware you are flashing (you should have already downloaded it).

1. Click "PDA" and go to the folder with your file. Find and click on the file that ends in "tar.md5".

2. Click "Start" to begin flashing. Odin will display the current progress during the flashing.

3. Your device will automatically reboot once the process is complete.

To Obtain Root

Extract the CF-Auto-Root file.

1. Click "PDA" and go to the folder with your file. Find and click on the file that ends in "tar.md5".

2. Click "Start" to begin flashing. Odin will display the current progress during the flashing.

3. Your device will reboot into stock recovery. From there, reboot.

Now your device is rooted, but you are going to want to install a custom recovery to replace the stock one. This will enable you to flash custom ROMs, make complete system backups with ease (nandroid), partition your SD card, and much more.

4. Open up ROM Manager on the GS3.

5. Select "Recovery Setup" and install either ClockWorkMod Recovery (CWM) or Team Win's Touch Recovery (TWRP).

After installing recovery, you are all set!

Terms You Should Know

• Re-Partition: Re-partitions the layout
• Auto Reboot and F. Reset Time: Reboots the phone after the flashing process is complete and resets the phone's internal flash counter. These two always should be checked.
• PIT: This is a file that describes the layout of the partitions on your phone. Some firmwares already have this file included.
• PDA: The phone's complete OS.
• PHONE: The phone's radio and baseband (responsible for connecting you to your carrier).
• CSC: Determines specific country information and settings for your phone.

GS3 images by inam ghafoor